Titanium Dioxide Products

YELLOW Pigments

Featuring high levels of safety, weather resistance, thermal resistance, and chemical resistance, our yellow pigments are used in various applications including paints and plastics.

Strengths

1. Strength 1
   High dyeing effect
2. Strength 2
   High hiding power
3. Strength 3
   Excellent heat resistance

Typical Applications

• For Paints Application
• For Plastics Application

You can click on a grade to view product specifications for that grade.
The product recommendations in the table below are based on our past experiences. However, we neither assume responsibility nor guarantee the performance or appropriateness of product(s) you select according to this table.
Please note that this table serves only as a reference for selecting and investigating your product(s).
For details on the practical selection and use of our products, be sure to contact ISK's Sales and Marketing Division.

	Lemon yellow	Reddish yellow
Reduced color	TY-50	TY-100 (high gloss)
Full color	TY-70	TY-200
	TY-70S	TY-300 (high tinting power)
		TY-400

※ TY-70S and all Reddish Yellow series products have been included in the positive list of the Japan Hygienic Olefin and Styrene Plastics Association.

Color samples

Lemon Yellow series products (TY-70 and TY-70S have the same color).

TY-50	TY-70
TIPAQUE YELLOW 100%	TIPAQUE YELLOW 100%
TIPAQUE YELLOW 95% Ultramarine blue 5%	TIPAQUE YELLOW 95% Ultramarine blue 5%

Each color sample will display slightly differently depending on the personal computer used.
Contact our Sales and Marketing Division if you need a color sample.

Reddish Yellow series products

TY-100	TY-200	TY-300	TY-400
TIPAQUE YELLOW 100%	TIPAQUE YELLOW 100%	TIPAQUE YELLOW 100%	TIPAQUE YELLOW 100%
TIPAQUE YELLOW 9% R-930 91%	TIPAQUE YELLOW 9% R-930 91%	TIPAQUE YELLOW 9% R-930 91%	TIPAQUE YELLOW 9% R-930 91%

Each color sample will display slightly differently depending on the personal computer used.
Contact our Sales and Marketing Division if you need a color sample.

Safety of TIPAQUE YELLOW^TM

Heavy metals such as arsenic, lead, antimony, and mercury are usually toxic. However, TIPAQUE YELLOW^TM hardly allows any antimony, nickel or chrome to dissolve into water since this product is a solid solution. Because this product contains chrome in a trivalent state, it is non-hazardous. Therefore, we can feel confident in using this product instead of chrome yellow or cadmium yellow.

Reference data and related laws and regulations

• We entrusted biological toxicity tests of TIPAQUE YELLOW^TM to the Medical Department of Mie University, a national university in Japan, and the Pharmacological Laboratory of Tokyo Medical University, a private university in Japan. The experimental results show that antimony oxide contained in this product does not exhibit any toxicity as long as it is used as pigments. The test results were reported in Tokyo Medical University Bulletin, vol. 21, No. 1. For any questions concerning test results, please contact our Sales and Marketing Division.
• "Designation of Poisonous and Deleterious Substances" (in Japanese), Article 2, Section 7 (Cabinet Order No. 2 released on January 4, 1965)
  Article 2 (deleterious substances)
  "Based on the provisions prescribed in No. 94 in Table 2 of the Poisonous and Deleterious Substances Control Law, the substances described below shall be designated as deleterious substances. However poisonous substances are excluded from the designation."
  Section 7
  "Antimony compounds and pharmaceuticals containing antimony compounds, excluding antimony sulfide, pharmaceuticals containing antimony sulfide, and titanium/nickel/antimony-base pigments"
• Titanium yellow has been classified into F-5, inorganic yellow pigments (3), of the "positive list for polyvinyl chloride food container packaging." This positive list was prepared to promote the use of safe materials for packaging polyvinyl chloride food containers in light of the Japanese Food Sanitation Law in order to ensure the hygienic safety of food contained in such containers.